咨询热线:

0531-88771136

您的当前位置: 首页 > 新闻中心 > 正文

济南beplay全站app安卓判断注塑beplay全站app安卓质量的四个标准

来源:http://www.jnhjgs.cn     发布时间:2019-05-27 18:25:12    点击:

  济南beplay全站app安卓判断注塑beplay全站app安卓质量的四个标准,注塑beplay全站app安卓属于一种塑料制品的生产工具,通过成型复杂形状的加工方法来大规模生产产品,注塑过程中生产、注塑beplay全站app安卓的质量是决定然后产品的质量,特别是对于一些精度类电子产品注塑beplay全站app安卓的要求特别高,当我们选择注塑beplay全站app安卓需要全面衡量,那么如何判断注塑beplay全站app安卓的质量呢?
  Jinan Mold is one of the four standards for judging the quality of injection moulds. Injection moulds belong to a kind of production tool of plastic products. The large-scale production of products is achieved through the processing method of forming complex shapes. The quality of production and injection moulds in the process of injection moulding determines the quality of final products. Especially for some precision electronic products, the requirement of injection moulds is very high. When we choose injection moulds, we need to use them. To measure comprehensively, how to judge the quality of injection moulds?
  注塑beplay全站app安卓质量检测4项标准
  Four Standards for Quality Inspection of Injection Mold首先在注塑产品的过程中,通常在注塑beplay全站app安卓温度较高,所以工厂注塑beplay全站app安卓制造注塑beplay全站app安卓必须接受高温回火钢钢,所以即使在高温的环境整体设计好beplay全站app安卓尺寸将不受影响,以保证beplay全站app安卓的精度。
                        济南beplay全站app安卓
  Firstly, in the process of injection products, the temperature of injection mold is usually higher, so the injection mold in factory must accept high temperature tempered steel, so even in the high temperature environment, the overall design of the mold size will not be affected, in order to ensure the accuracy of the mold.
  其次,在注塑生产过程中,树脂等塑料制品的原材料和各种添加剂会对注塑beplay全站app安卓表面形成腐蚀,从而影响整个注塑beplay全站app安卓的精度。
  Secondly, in the process of injection moulding, raw materials and additives of plastic products such as resins will corrode the surface of injection moulds, thus affecting the accuracy of the whole injection moulds.
  塑料制品表面光泽一般有很高的要求,因此在注塑生产过程中需要相应的注塑beplay全站app安卓腔表面粗糙度很小,以符合标准的塑料制品、注塑加工必须选择不含杂质和beplay全站app安卓钢的孔隙度,制造注塑beplay全站app安卓后还必须在beplay全站app安卓型腔的表面抛光、磨等加工。
  The surface gloss of plastic products generally has high requirements, so the surface roughness of injection mould cavity is very small in the process of injection moulding production. In order to meet the standards of plastic products and injection moulding processing, the porosity of mould steel must be selected without impurities. After manufacturing the injection moulds, the surface polishing and grinding of the mould cavity must also be processed.
  济南beplay全站app安卓判断注塑beplay全站app安卓质量的四个标准,在使用的过程中注塑beplay全站app安卓来生产塑料制品,由于塑料原材料的高速流动的beplay全站app安卓型腔注塑beplay全站app安卓,整个beplay全站app安卓的表面会形成很多摩擦,因此有必要选择耐磨beplay全站app安卓钢,以确保产品的质量质量注塑过程中始终保持稳定。
  There are four criteria for judging the quality of injection mold in Jinan. In the process of using injection mold to produce plastic products, because of the high-speed flow of plastic raw materials in the injection mold cavity, there will be a lot of friction on the surface of the whole mold. Therefore, it is necessary to select wear-resistant die steel to ensure the quality of products to maintain stability throughout the injection process.
 
联系我们 contact

山东济南beplay全站app安卓_铝合金压铸厂-济南宏捷beplay全站app安卓有限公司

电话1:13173017488

电话2:18615459955

传真:0531-88771136

邮箱:hlm369@126.com

地址:山东省济南市大桥镇大王村北跨商务中心后三层白楼

山东济南beplay全站app安卓_铝合金压铸厂-济南宏捷beplay全站app安卓有限公司 手机: 13173017488 咨询热线: 0531-88771136 咨询热线:18615459955 邮箱:hlm369@126.com

公司地址: 山东省济南市大桥镇大王村北跨商务中心后三层白楼