The products produced by injection mold have already been seen everywhere in our life, but in fact many people don't know much about injection mold processing. This article will take you to understand several ways of injection mold processing drive
Injection mold processing and movement of the drive and driving force is provided by the power of the processing machine and equipment through the transmission mechanism.
Mechanical and electrical transmission: such as punching press, friction press, roll forging machinery, etc., are powered and rotated by the motor to drive the transmission mechanism, and connect the slider and the moving part of the die to drive the directional movement of the die, and transfer the driving force acting on the die to make the die in the forming process.
Electro hydraulic drive: the injection motor drives the hydraulic pump or water pump to generate hydraulic pressure and water pressure. Through the hydraulic transmission and control system of the liquid, a certain rated pressure is generated to drive the hydraulic cylinder or piston connected with the moving parts of the mold (such as the moving mold), so as to drive the moving mold to move in a directional direction relative to the fixed mold, and further compress the material, The material is processed into finished product.
Air pressure molding: mainly used for suction and blow molding, that is, when the mold is in a fixed state, the plastic sheet is directly sucked in by the air pump and pasted on the mold surface to form parts.
In addition, injection mold processing drives, such as aluminum alloy profiles, plastic profiles, plates or films, are generally used in the extrusion process. The die is fixed on the die, and the material is extruded through the die and moves relative to the die.