咨询热线:

0531-88771136

您的当前位置: 首页 > 新闻中心 > 正文

beplay全站app安卓结构设计的注意事项都有哪些?

来源:http://www.jnhjgs.cn     发布时间:2020-03-23 15:56:13    点击:

压铸模结构设计5大注意事项
  Five points for attention in die casting die structure design
  1、beplay全站app安卓应具有足够的刚性,在压铸机的条件下夹紧力不会变形。
  1. The die shall be rigid enough that the clamping force will not deform under the condition of the die casting machine.
  2、beplay全站app安卓不宜太重,便于安装、拆卸、维修和搬运,并减少压铸机的负荷。
  2. The die should not be too heavy, easy to install, dismantle, maintain and handle, and reduce the load of the die casting machine.
  3.beplay全站app安卓的压力应尽可能靠近压铸机的合模力,以避免压铸机受力不均匀,导致铸件锁模和毛刺。
  3. The pressure center of the die should be as close to the die-casting force center as possible, so as to avoid uneven stress of the die-casting machine, resulting in die locking and burr of the casting.
  4. beplay全站app安卓形状应符合压铸机的规格:山东beplay全站app安卓
  4. The mold shape shall conform to the specification of the die casting machine:
  beplay全站app安卓的长度不应干扰拉杆。
  The length of the mould shall not interfere with the pull rod.
  beplay全站app安卓的总厚度不应过厚或过薄,超出压铸机夹紧范围。
  The total thickness of the die should not be too thick or too thin, beyond the clamping range of the die casting machine.
  注意物料管(冷室机)或喷嘴(热室机)。
  Pay attention to the material pipe (cold chamber machine) or nozzle (hot chamber machine).
  当使用回拉杆回拉顶出机构时,注意回拉杆的大小和位置。
  When using the pull back ejector mechanism, pay attention to the size and position of the pull back mechanism.
  5. 为了便于beplay全站app安卓的搬运和装配,在固定beplay全站app安卓和活动beplay全站app安卓的上方和两侧都要钻上螺丝孔,以便于在头螺栓上的螺丝
  5. In order to facilitate the handling and assembly of the mold, screw holes shall be drilled above and on both sides of the fixed mold and the movable mold to facilitate the screws on the head bolts
  以上就是山东beplay全站app安卓对结构设计的注意事项的详细介绍,想要了解更多请点击官网http://www.jnhjgs.cn
  The above is a detailed introduction of Shandong mold's precautions for structural design. For more information, please click http://www.jnhjgs.cn
联系我们 contact

山东济南beplay全站app安卓_铝合金压铸厂-济南宏捷beplay全站app安卓有限公司

电话1:13173017488

电话2:18615459955

传真:0531-88771136

邮箱:hlm369@126.com

地址:山东省济南市大桥镇大王村北跨商务中心后三层白楼

山东济南beplay全站app安卓_铝合金压铸厂-济南宏捷beplay全站app安卓有限公司 手机: 13173017488 咨询热线: 0531-88771136 咨询热线:18615459955 邮箱:hlm369@126.com

公司地址: 山东省济南市大桥镇大王村北跨商务中心后三层白楼