咨询热线:

0531-88771136

您的当前位置: 首页 > 新闻中心 > 正文

山东beplay全站app安卓日常维护流程都有哪些及重要性?

来源:http://www.jnhjgs.cn     发布时间:2019-11-27 15:57:36    点击:

任何东西都离不开日常维护,大家也都知道日常维护有多重要,山东beplay全站app安卓也是需要维护的,那么现在就由济南市宏捷beplay全站app安卓有限公司带大家里了解一下如何完善的做好beplay全站app安卓的维护工作?
  Everything is inseparable from the daily maintenance. We all know how important the daily maintenance is. Shandong mold also needs to be maintained. Now, Jinan Hongjie Mold Co., Ltd. will take you to understand how to complete the mold maintenance work?
  日常负责beplay全站app安卓保养工作的保养者必须慎重、细心地作业,切实保证beplay全站app安卓的状态,已期做到在生产时有效、经济,尽可能的降低制造成本。
  The maintainer who is responsible for the daily maintenance of the mould must work carefully and carefully to ensure the best condition of the mould, which is expected to be effective and economical in production and reduce the manufacturing cost as much as possible.
  首先,保养须知:注塑beplay全站app安卓保养时,需要按照图纸检查部件。即使没有特别指示的东西,也要在入库时进行检查;不得擅自修改不符合图纸规定的beplay全站app安卓零部件尺寸,也不能用垫块或垫片进行追加插入等等;生产订单完成后的beplay全站app安卓保养,必须参照生产部门提供的问题点、生产部门记录以及更终产品进行;在beplay全站app安卓保养中,如发现重大问题,应立即向上级主管报告,并等待指示。
  First of all, maintenance instructions: when maintaining the injection mold, it is necessary to check the parts according to the drawings. Even if there is no special instruction, it shall be inspected when it is put into storage; it is not allowed to modify the dimensions of mold parts that do not meet the requirements of the drawings without authorization, or add inserts with cushion blocks or gaskets, etc.; the mold maintenance after the completion of the production order must refer to the problem points provided by the production department, the records of the production department and the final products; during the mold maintenance, if it is found that Major problems shall be reported to the superior immediately and wait for instructions.
山东beplay全站app安卓
  其次,有关注塑beplay全站app安卓保养的具体要求:在更换beplay全站app安卓部件时,确认将更换的部件品质合格;各部件拆卸、装配要轻敲、缓压;beplay全站app安卓镶件装配时,确认配合间隙合格;避免部件表面无卷翘、划伤、凹点、糟粕、缺损、铁锈等情况;如有部件更换,及时与beplay全站app安卓设计部门沟通和确认,拆卸beplay全站app安卓前后时,注意保持各个部件拽拉平衡;如有需要更换的部件,必须及时更换。
  Secondly, the specific requirements for the maintenance of injection mold: when replacing the mold parts, confirm that the quality of the parts to be replaced is qualified; when disassembling and assembling the parts, tap and slow press; when assembling the mold inserts, confirm that the fit clearance is qualified; avoid no curling, scratch, pit, dross, defect, rust, etc. on the surface of the parts; if there are parts to be replaced, timely communicate with the mold design department General and confirmation: before and after disassembling the mold, pay attention to keep the pulling balance of each part; if there are parts that need to be replaced, they must be replaced in time.
  ,注塑beplay全站app安卓日常的维护必须慎重、细心地进行,以确保beplay全站app安卓时刻保持在状态。
  Finally, the daily maintenance of injection mold must be carried out carefully to ensure that the mold is always in the best condition.
  以上就是由济南市宏捷beplay全站app安卓有限公司带大家里了解一下如何完善的做好beplay全站app安卓的维护工作的介绍,希望可以帮到你,想要了解更多请点击官网http://www.jnhjgs.cn
  The above is the introduction of Jinan Hongjie mould Co., Ltd. to learn how to improve the maintenance of mould. I hope it can help you. For more information, please click http://www.jnhjgs.cn
联系我们 contact

山东济南beplay全站app安卓_铝合金压铸厂-山东宏捷beplay全站app安卓有限公司

电话1:13173017488

电话2:18615459955

传真:0531-88771136

邮箱:hlm369@126.com

地址:山东省济南市大桥镇大王村北跨商务中心后三层白楼

山东济南beplay全站app安卓_铝合金压铸厂-山东宏捷beplay全站app安卓有限公司 手机: 13173017488 咨询热线: 0531-88771136 咨询热线:18615459955    邮箱:hlm369@126.com

公司地址: 山东省济南市大桥镇大王村北跨商务中心后三层白楼