咨询热线:

0531-88771136

您的当前位置: 首页 > 新闻中心 > 正文

铝合金压铸件在操作时被损伤该怎么处理?

来源:http://www.jnhjgs.cn     发布时间:2019-10-21 11:11:45    点击:

  铝合金压铸工艺一般可分为:喷漆,除尘和电泳。 对工件进行表面处理后,针对不同工件的外观和耐蚀性要求选择合适的喷涂工艺和设备,并注意流平,干燥和冷却的控制,否则会影响产品质量。 尽管我们非常小心,但有时铝合金压铸件会受伤。 我们应该做什么?
  Aluminum alloy die casting process can be generally divided into: painting, dust removal and electrophoresis. After the surface treatment of the workpiece, the appropriate spraying process and equipment shall be selected according to the appearance and corrosion resistance requirements of different workpieces, and the control of leveling, drying and cooling shall be paid attention to, otherwise the product quality will be affected. Although we are very careful, sometimes aluminum die castings can get hurt. What should we do?
山东铝合金压铸
  1.取模或取边后,工件被模,设备或工作台的边或角碰到;
  1. After taking the mold or edge, the workpiece is touched by the edge or angle of the mold, equipment or workbench;
  2.在各个操作步骤中铝合金压铸件的堆放不当;
  2. Improper stacking of aluminum alloy die castings in each operation step;
  3.各个操作程序的操作者未正确操作,例如扔掉碎片;
  3. Operators of various operation procedures do not operate correctly, such as throwing away debris;
  4.流程之间的转移,如果没有分开,保护,崩溃等;
  4. Transfer between processes, if not separated, protected, collapsed, etc.
  5.每个操作过程中的操作工具的凸块,例如压铸拾取钩,拾取钳等,清洁过程中的镗孔工具和冲头。
  5. Boss of operation tools in each operation process, such as die casting pick-up hook, pick-up pliers, etc., boring tools and punches in cleaning process.
  6,提货时要注意,不要碰碰;
  6. Pay attention not to touch when picking up the goods;
  7.根据操作说明的要求,不允许堆放,必须整齐地放置在站内设备中;
  7. According to the requirements of the operation instructions, it is not allowed to stack, and it must be placed neatly in the equipment in the station;
  8,不允许丢件,轻拿轻放,如铝合金压铸件必须从工作台上慢慢滑出,不允许互相碰撞;
  8. It is not allowed to lose parts and handle them with care. For example, aluminum alloy die-casting parts must slide out of the workbench slowly, and collision with each other is not allowed;
  9.站内设备的铝合金压铸件必须加以保护和隔离,运输应缓慢,以防止铸件倒塌或掉落;
  9. The aluminum alloy die castings of the equipment in the station must be protected and isolated, and the transportation shall be slow to prevent the castings from collapsing or falling;
  10.正确使用操作工具以防止碰撞。 不允许铝合金压铸件捡起或拿走铸件。 必须在要清洁的区域内准确清洁锉刀和打孔器。
  10. Use the operating tools correctly to prevent collision. Aluminum die castings are not allowed to pick up or remove castings. Files and punches must be cleaned accurately in the area to be cleaned.
  11.存放铝合金压铸件时,应将其放置在通风干燥的环境中;
  11. When storing aluminum alloy die castings, they shall be placed in a ventilated and dry environment;
  12.避免铝合金压铸件与其他化学元素接触。 与其他化学元素接触后,铝合金压铸件将发生其他变化。
  12. Avoid contact of aluminum alloy die casting with other chemical elements. After contacting with other chemical elements, other changes will take place in aluminum alloy die casting.
  13.由于铝是一种活性金属,因此在接触一定温度后很容易被氧化。 放置铝合金压铸件时,应避免阳光直射;
  13. Because aluminum is an active metal, it is easy to be oxidized after contact with a certain temperature. When placing aluminum alloy die castings, avoid direct sunlight;
  14.好将铝合金压铸件放置在特定的位置,以确保铝合金压铸件完好无损,并且不会发生其他变化;
  14. It is better to place the aluminum alloy die-casting in a specific position to ensure that the aluminum alloy die-casting is intact without any other changes;
  15.放置铝合金压铸件时,请勿使压铸件与水接触。 与水接触后,很容易使铝合金压铸件发黑。
  15. When placing the aluminum alloy die casting, do not make the die casting contact with water. After contacting with water, it is easy to blacken the aluminum alloy die casting.
  通常情况下,只有不刮伤铝合金压铸件时,它们才具有更好的光泽,颜色和耐候性。
  In general, only when the aluminum alloy die castings are not scratched can they have better luster, color and weather resistance.
  本文由山东铝合金压铸厂家<http://www.jnhjgs.cn/>友情奉献.更多有关的知识请点击:<http://www.jnhjgs.cn/>,我们将用先进的技术,真诚的态度,为您提供为全面的服务。更多有关的知识我们将会陆续向大家奉献,敬请期待!
  This paper is dedicated by Shandong Aluminum Alloy Die Casting Factory < http://www.jnhjgs.cn/ /. For more information, please click < http://www.jnhjgs.cn/ > and we will provide you with comprehensive services with advanced technology and sincere attitude. We will continue to dedicate more knowledge to you, please look forward to!
联系我们 contact

山东济南beplay全站app安卓_铝合金压铸厂-济南宏捷beplay全站app安卓有限公司

电话1:13173017488

电话2:18615459955

传真:0531-88771136

邮箱:hlm369@126.com

地址:山东省济南市大桥镇大王村北跨商务中心后三层白楼

山东济南beplay全站app安卓_铝合金压铸厂-济南宏捷beplay全站app安卓有限公司 手机: 13173017488 咨询热线: 0531-88771136 咨询热线:18615459955 邮箱:hlm369@126.com

公司地址: 山东省济南市大桥镇大王村北跨商务中心后三层白楼